JINAN TRUCKMAN AUTOMOBILE CO.,LTD

Our Dr Congo customer purchase 5 units SHACMAN F3000 6x4 dump truck before, now need a small water tanker truck for his construction site clean work. According to the customer's requirements, we recommended the 10,000 liters SHACMAN L3000 water tanker truck. This SHACMAN water tanker truck has a front spray and rear sprinkler function, which not only cleans, but also extinguishes fires and transports drinking water. The price/performance ratio is very high. After 45 days production, now truck is going to shipping port, ready to shipment.

This SHACMAN L3000 water tanker truck use the WEICHAI engine and GEARBOX gearbox. The transmission efficiency of the whole vehicle is as high as 97% or more, with better adaptability to road conditions and better fuel economy. And you can choose to install retarder, its role is to better control the speed, driving more safely. The axle is a 10T MAN technology single-stage axle with a speed ratio of 3.7, and the leaf springs of the suspension are designed with fewer leaf springs. This configuration is very suitable for running short and medium distance transport, in the case of good power, but also to ensure a certain degree of carrying capacity.

How To Maintenance The SHACMAN L3000 Water Tanker Truck ?

1. Often check the fixing of water tank, pump frame and bracket, and all nuts should be tightened to ensure that the connection is tight and reliable.

2. Always check the sealing condition of the joints, switches and suction hoses of the water system, if leakage is found, the seals should be restored or replaced immediately.

3. U-bolts must be tightened regularly, especially when the new car is used.

4. Often check the connection between the extractor and the water pump, should be connected reliably, normal operation, use if the extractor and pump oil leakage, should replace the seals.

5. The medium through the ball valve should not be too dirty, so as not to scratch the sealing ring, reducing the service life of the ring valve, the ball valve should not be in a half-open state for a long time to work, otherwise it is easy to make the sealing ring deformation.

6. Into the pump strainer should be frequently dismantled and cleaned, in order to prevent the dregs clogging the strainer, affecting the flow.