
TRUCKMAN International Sales Center
SALES DEPARTMENT 1
Contact Person: Eric GAO
E-mail: eric@truckmanauto.com
Contact Person: Angela WANG
E-mail: angela@truckmanauto.com
Contact Person: Luna LIU
E-mail: luna@truckmanauto.com
SALES DEPARTMENT 2
Contact Person: Tyne GUO
E-mail: tyne@truckmanauto.com
Contact Person: Scott YANG
E-mail: scott@truckmanauto.com
Liberia's road network of about 13,026 km is only around 9.6 percent paved, and the May to October rainy season leaves many routes muddy and difficult, while quarry and ore haulage keep a steady demand for high volume earthmoving.
The HOWO TX dump truck answers that with a 20 cubic meter body and a 371HP engine that moves more material per trip over rough, wet ground.
For quarry and construction operators moving red soil and crushed stone, this truck combines a large body with the torque and running gear strength to keep working through the wet season.
The HOWO TX dump truck is a heavy duty 6X4 tipper customized for Liberia's earthmoving and quarry market, combining a large body with strong low speed torque. It boasts the following specialized configurations:
● A 20 cubic meter body that reduces the number of trips on high volume earthmoving
● A SINOTRUK WD615.47 engine rated at 371HP for strong low speed torque on muddy starts
● 16 ton MCX16ZG rear axles that carry heavy loads with reserve capacity
● 12.00R20 tube type tires that resist puncture on crushed stone and are easy to repair locally
It is capable of adapting to the actual operating conditions at construction and quarry sites in Liberia, delivering reliable hauling through the rainy season.
Because its chassis is lighter, stronger, safer, and more intelligent.Its chassis is a modified lightweight, high-strength frame, and many components are made of aluminum alloy, allowing it to carry more cargo. It offers enhanced safety; its cab is constructed of high-strength steel, meeting European collision standards. It is equipped with Lane Departure Warning System (LDWS), Forward Collision Warning System (FCWS), and offers an optional 360° surround-view camera to reduce blind spot risks. Both its active and passive safety features are superior.Contact us for shipping to Ghana.

|
Description |
Value |
|
Platform |
HOWO |
|
Model |
ZZ3257N364GB1 |
|
Capacity |
30Tons |
|
Engine |
WD615.47 |
|
Gearbox |
HW19710 |
|
Tyre |
12.00R20 |
|
Front Axle |
VGD95 |
|
Rear Axle |
MCX16ZG |
|
Cabin |
TX-F |
|
Model |
Drive Type |
Payload |
|
6X6 |
40Tons |
|
|
8X4 |
50Tons |
|
|
8X4 |
60Tons |
--->Ask us which model is better for 70 Tons Of Mining Transportation.
We use high-quality steel, laser-cut steel plates, automated robotic welding, sandblasting, and electrostatic painting processes.We use Q235 carbon steel, Q355 manganese steel, T700 high strength steel and HARDOX450 wear resistance steel for cargo boxes.We use laser cutting to achieve clean, burr-free cuts with millimeter-level precision. Robotic welding ensures uniform, deviation-free welds. Before painting, we perform sandblasting to thoroughly remove surface impurities and improve paint adhesion. Finally, we use electrostatic spraying to create a uniform, dense coating with excellent corrosion and wear resistance.

Liberia's road network is overwhelmingly unpaved, and quarry and ore work demand moving large volumes over rough ground. This presents the following challenges:
● Rough unpaved roads punish lightly built trucks and running gear
● High volume haulage means more trips unless the body is large
● Weak low speed torque struggles on soft, uneven surfaces
The 20 cubic meter body cuts the number of trips, while the reinforced running gear and strong torque keep the truck moving over rough roads.
Liberia's rainy season from May to October leaves routes muddy and slippery, demanding strong traction and puncture resistance. This presents the following challenges:
● Muddy, slippery ground demands strong low speed torque for restarts
● Crushed stone and rough surfaces puncture weak tires
● Tire failures on remote routes cause costly downtime
The 371HP engine delivers strong low speed torque for muddy starts, while the 12.00R20 tube type tires resist puncture and are easy to repair in the field.
Quarry and ore haulage runs near full loads over demanding ground, pushing the rear axles and frame hard. This presents the following challenges:
● Near full loads stress the rear axles on every run
● A lightly rated rear axle wears out under continuous heavy work
● Frame flex under load shortens truck life on rough ground
The 16 ton MCX16ZG rear axles and reinforced chassis carry heavy loads with reserve capacity, extending service life under continuous quarry and ore work.
HOWO TX 371HP vs SHACMAN H3000 336HP Comparison
|
Item |
HOWO TX 371HP |
SHACMAN H3000 336HP |
|
Engine Power |
371HP |
336HP |
|
Body Capacity |
20 m³ |
18 m³ |
|
Gearbox |
HW19710, 10 speed |
FAST 9JS135T, 9 speed |
|
Rear Axle |
MCX16ZG, 16 t |
13 t |
|
Best For |
High volume earthmoving and muddy rainy season haulage |
General quarry work on moderate terrain |
For quarry and construction operators hauling heavy loads over Liberia's rough and muddy roads, the HOWO TX 371HP is a higher capacity and closer geared choice for high volume earthmoving through the wet season.
Country: Liberia
Customer Type: Quarry and Construction Materials Supplier
Quantity: 4 Units
Application: Hauling red soil and crushed stone for road and construction projects across the region.
Feedback: The 20 cubic meter body cut our trips on the big earthmoving jobs, and the 371HP engine pulls through the muddy starts where our older trucks bogged down in the rainy season. The 16 ton rear axles handle the full loads every day, and the tube type tires are easy to fix on site.
--->For more details, please visit<---
A: We are TRUCKMAN AUTO,a manufacturer with years of experience in research and development, design, and manufacturing in China
A: It depends on the order quantity, and generally takes 15-40 days.
A: Our products use only genuine, original components from well-known brands and come with official brand warranties. Furthermore, we conduct thorough factory inspections on every product before it leaves the factory.
A: For most products, the MOQ is 1 unit.